Panasonic DMC-FZ70 owner manual Format, Language, Stabilizer Demo

Basics

Using the [Setup] menu

••For the setting procedures of the menu. (→57)

[Format]

Use when [Built-In Memory Error] or [Memory Card Error] appears, or when formatting the built-in memory or card.

When a card/built-in memory is formatted, the data cannot be restored. Check the content of the card/built-in memory carefully before formatting.

●●To format the built-in memory, remove the card.

(Only inserted card will be formatted if present; built-in memory will be formatted if no card is inserted.)

●●All protected pictures and other picture data will be deleted.

●●This requires a sufficiently charged battery, or an AC adaptor (optional) and DC coupler (optional). Do not turn off power or perform other operations during formatting.

●●Always format cards with this camera.

●●Formatting the built-in memory may take several minutes.

●●If the card cannot be formatted, please try another card before contacting your nearest Service Center.

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact

us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649).

[Language]

Change display language.

Set the language displayed on the screen.

[Stabilizer Demo.]

Extent of jitter is shown on graph (estimate).

Extent of jitter

Extent of jitter after correction

●●During demo screen display, the Optical Image Stabilizer switches ON and OFF every time [MENU/SET] is pressed.

- 73 - VQT5B76