Panasonic DMC-FZ70 owner manual Message displays, 210

Others

Message displays

The following explains the meaning of major messages displayed on the LCD monitor or viewfinder, and how to respond to them.

[Some pictures cannot be deleted] [This picture cannot be deleted]

●●Non-DCF pictures (→49) cannot be deleted.

→ Save needed data on a computer or other device, and then use [Format] on the camera. (→73)

[Cannot be set on this picture]

●●[Print Set], [Title Edit], or [Text Stamp] cannot be made for non-DCF pictures (→49).

[Please turn camera off and then on again] [System Error]

●●This is displayed when the lens has stopped operating normally due to being pressed on by a hand etc.

→Turn the camera on again.

(Consult the dealer or your nearest Service Center if display still remains.)

[Some pictures cannot be copied] [Copy could not be completed]

●●Pictures cannot be copied in following cases.

-Picture of same name already exists in built-in memory when copying from card.

-File is not of DCF standard (→49).

-Picture taken or edited on a different device.

[Built-in memory full] [Memory card full] [Not enough space on built-in memory] [Not enough memory on the card]

●●There is no space left on the built-in memory or the card. When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.

[Built-In Memory Error] [Format built-in memory?]

●●Displayed when formatting built-in memory via computer, etc. → Reformat directly using camera. Data will be deleted. (→73)

[Memory card error. This card cannot be used in this camera. Format this card?]

●●The card format cannot be used with this camera.

→Try with a different card.

→Save needed data on a computer or other device, and then use [Format] on the camera. (→73)

[Insert SD card again] [Try another card]

●●Access to card has failed.

→Insert card again. ●●Try with a different card.

- 210 - VQT5B76