Reference Settings
RQT9334
(ENG)
37
Audio and video information
Before connecting, read the table below, and confirm the desired audio type and necessary settings (“BD-Video Secondary Audio”,
“Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD”). (>33)
≥The number of channels listed is the maximum possible number of output channels.
HDMI AV OUT
≥Also, depending on the specifications or the settings of the amplifier/receiv er, the results of the output may vary.
*1 When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS
Digital Surr ound bitstrea m or down- mixed 2ch PCM (e.g., TV).
*2 When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
*3 [BD-V]: When playing BD-Video without secondary audio or button click sound, the audio is output as the same format as if “BD-
Video Secondary Audio” was set to “Off”.
*4 With PCM ou tput, Dolb y Digital EX and DTS-ES will be PC M audio d e coded a s Dolby Digita l and DTS Digital Surround resp e c tively.
*5
[BD-V]
: When “B D -Video Seconda ry Audio ” is set to “On”, Dolby Digital EX is output as D olby Digital and DT S-ES is output as D TS
Digital Surround, however if playing BD-Vide o without secondary a udio or button click s ound, the au dio is o utp ut as the original forma t.
*6 The output is PCM au dio decoded as D olb y D igital for Dolby Digital P lus or Dolb y TrueHD, an d as DTS Digital Surround for DT S-HD
High R esolution Audio and DTS - HD M aster A udio.
*7 [BD-V]: When the connecting equip ment suppo rts 7.1 channel surro und, output will be extended from 5.1 ch or 6.1 ch to 7.1 ch
according to the specification of DTS, Inc.
[BD-V]
This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in
BD-Video. In order to enjoy these audio formats, the following conditions are necessary. (Part shown in the shaded area of table given above)
NECESSARY CONNECTIONS
≥HDMI AV OUT terminal: (>25)
NECESSARY SETTINGS
≥Se t “B D -Video Sec o ndary Au di o” t o “O ff” . (>33)
≥Set “HDMI Audio Output” to “On”. (>34)
≥HDMI AV OUT terminal: Set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “Bitstream” or “PCM”. (>33)
≥The button click sound on the menu and audio with secondary video in picture-in-picture mode (>17) is not output .
[BD-V]
Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However , they will normally
be output in 60 frames/second in accordance with the display format. These can be output in 24p as the original. Therefore, high-
quality vi deo can be enjoyed, such as the improved cl arity, en hanced perspecti v e, etc .
NECESSARY CONNECTIONS
≥Connect to a TV suppor ting 1 080/24 p input via an HDMI cable.
NECESSARY SETTINGS
≥“24p Output” and “HDMI Audi o Output”: “On” (>34)
About audio from audio output terminals
Terminal HDMI AV OUT
“Dolby D/Dol by D +/Dol by
TrueHD”/“DTS/DTS-HD” “Bitstream”*1“PCM”*2
“BD-Video Secondary Audio” “On”*3“Off” “On” “Off”
Dolby Di gital/
Dolby Digital EX*4Do lby Digital /
Dolby Digital EX*5Dolby Digital/
Dolby Digital EX 5.1ch PCM*6
Dolby Digi tal Plus Dolby Digital Dolby Digital Plus
Dolby True HD Dolby TrueHD
DTS Digital Surround/
DTS-ES*4DTS Digital Surround/
DTS-ES*5DTS Digital Surround/
DTS-ES
[DVD-V] 5.1ch
[BD-V] 7.1ch *7
DTS-HD High Resoluti on Audio DTS Digital Surround
DTS-HD High
Resolution Audio [BD-V] 7.1ch*6, *7
DTS-HD Master Audio DTS-HD Master Audio
7.1ch LPCM Down-mixed 5.1ch
PCM 7.1ch PCM Down-mixed 5.1ch
PCM*37.1c h PC M
Enjoying High Bit rate Audio of BD-Video
Regarding 24p output
DMPB15P-RQT9334_eng.book 37 ページ ２００９年３月２８日 土曜日 午後２時３９分