Panasonic K10059 Using the Panic Keys, Press and hold the required Panic keys for two seconds

SecurityPhone.book 20 ページ ２００４年７月２１日 水曜日 午後６時５８分

PANIC Keys

The PANIC keys can manually activate emergency (panic) functions, and send signals to the Customer Monitoring Center, if the system is being monitored.

Using the PANIC Keys

If the PANIC key is pressed while a phone is in use, the operation of a phone is cancelled.

Base Unit

Press and hold the required PANIC keys for two seconds.

Handset

1Press the soft key ( PANIC ).

2Press and hold the soft key (FIRE, POLICE or MED.) until an alarm sounds.

• ADT monitoring service must be in effect!

To stop and clear a fire alarm

1Enter the security code.

OR Press [1].

PANIC keys

(FIRE, POLICE, MED.)

A D T PANIC P L AY

Emergency Select

FIRE POLICE MED.

•If the system is armed, the system becomes disarmed.

•Alarm stops.

•Check the zone (the zone will be shown on the display). Make sure that it is intact.

2Press [ADT].

3Enter your security code, then press [1].

• Alarm display will be cleared. If the display is not cleared, try again.

4Press [STOP] to go to the standby mode.

20