7
Arming the System
You can set the security mode through the function menu using the base unit or
handset. There are 4 modes, AWAY, STAY, Night-Stay and INSTANT.
If you want to change the security mode after you arm the system, disarm the
system, then set your required mode through the function menu.
Before arming the system, refer to the section “Entry/Exit Delays” on pages 12 to 13
and “Arming the System” on page 15 in the 3000EN Security Systems User’s Guide.
Make sure all perimeter doors and windows are closed and is
displayed.
• If protected windows and doors are opened when the system is armed:
—the phone alarms and a conversation or a call is disconnected, or an incoming
call is disconnected after you press [TALK] or the speakerphones to answer.
READY
SecurityPhone.book 7 ページ 2004年7月21日 水曜日 午後6時58分