38
Viewing the Event Log
The phone can record up to 100 events in a log. Event log is sorted by the most
recent to the oldest. When the 101st event is recorded, the oldest one is deleted.
Refer to “Event Logging Procedures” on pages 37 to 38 in the 3000EN Security
Systems User’s Guide.
: Press the soft key ( ), and follow steps 2 to 4 above, using
the cordless handset. Press [OFF] to go to the standby mode.
• When finished, press [0] to [9], or wait for 30 seconds. Then press [OFF] or
[STOP] to exit the menu.
1Press [ADT].
2Scroll to “OTHER FUNCTIONS” by pressing [
d
]
or [
B
], then press [
g
].
3Scroll to “VIEW EVENT LOG” by pressing [
d
]
or [
B
], then press [
g
].
4Enter your security code.
• To display the previous event, press [*].
To display the following event, press [#].
• If you press [#] at the latest event, the phone will
go back to the step 2.
• The number after “E” is the event log code.
(Example, “403” means “Schedule Arm/Disarm
AWAY”.) For further information, see “Table of
Event Log Codes” on page 38 in the 3000EN
Security Systems User’s Guide.
• If you entered the wrong security code, the phone
will go back to step 2. Try again from step 2.
• To exit the menu, wait for 30 seconds.
5Press [STOP] to go to the standby mode.
Base Unit
OTHER FUNCTIONS
g
VIEW EVENT LOG
g
ENTER CODE
----
005 E403 U000 P1
12:35AM 05/15/04
Example
Handset
ADT
SecurityPhone.book 38 ページ 2004年7月21日 水曜日 午後6時58分