42
Direct Commands
You can set the security mode using a security code and direct command. Confirm
with your installer or refer to the 3000EN Security Systems User’s Guide for available
direct commands.
While the security system is armed, you can not use this function. To
turn on, disarm the security system (p.12).
: Press the soft key ( ), and follow steps 2 and 3 above.
• If “Quick Arming” is programmed by the installer, you can arm the system by
pressing [#] instead of entering your security code.
1Press [ADT].
2Enter your security code.
3Enter the number of the desired commands.
• If the security mode is armed, the “DISARM” is
displayed at first.
Example of direct commands
[3] : STAY mode [3] [3] : Night-Stay mode
[7] : INSTANT mode [2] : AWAY mode
Base Unit
ARM
g
Example
Handset
ADT
SecurityPhone.book 42 ページ ２００４年７月２１日　水曜日　午後６時５８分