Security Codes & Authority Levels
30

Access Group

You can assign users to a group (1 to 8) and select the access group for “Schedule”
mode.
Refer to “Access group” on page 31 in the 3000EN Security Systems User’s Guide.
While the security system is armed, you can not turn on this function. To turn
on, disarm the security system (p. 12).
Make sure all perimeter doors and windows are closed and is
displayed.
1Press [ADT].
2Scroll to “OTHER FUNCTIONS” by pressing [
d
]
or [
B
], then press [
g
].
3Scroll to “USER CODES” by pressing [
d
] or [
B
],
then press [
g
].
4Scroll to “ACCESS GROUP” by pressing [
d
] or
[
B
], then press [
g
].
5Enter your security code.
6Enter the user number of 2 digits, then press
[
g
] (ENTER).
(Ex. To select user number 8, enter “08”.)
7Enter the access group number (1 to 8).
(Ex. To assign group number 1, press [1].)
8Press [
g
] (ENTER).
• If a confirmation tone (one beep) is not heard, you
entered the wrong security code in step 5 or wrong
user number in step 6. The setting is not saved. If
the system is wrongly armed, disarm the system,
and try again.
READY
Base Unit
OTHER FUNCTIONS
g
USER CODES
g
ACCESS GROUP
g
ENTER CODE
----
Enter User #
-,-
Enter User #
0,8
=ENTER
READY
g
Example
Access Grp (1-8)
-
Access Grp (1-8)
1
=ENTER
READY
g
Example
SecurityPhone.book 30 ページ ２００４年７月２１日　水曜日　午後６時５８分