40
Checking the Current Status

Display Status

You can display faulted zones and a current system status, using this feature.
Refer to “Checking For Open Zones” on page 14 in the 3000EN Security Systems
User’s Guide.
Make sure all perimeter doors and windows are closed and is
displayed.
: Press the soft key ( ), and follow step 2 above, using the
cordless handset. Press [OFF] to go to the standby mode.
1Press [ADT].
2Scroll to “STATUS REQUEST” by pressing [
d
]
or [
B
], then press [
g
].
• The current status of the phone is displayed for
10 seconds.
3Press [STOP] to go to the standby mode.
READY
Base Unit
STATUS REQUEST
g
Handset
ADT
SecurityPhone.book 40 ページ 2004年7月21日 水曜日 午後6時58分