Panasonic K10059 manual Selecting the Function Macro, Or B , then press g Press g at Functions A-D

SecurityPhone.book 23 ページ ２００４年７月２１日 水曜日 午後６時５８分

Selecting the Function (Macro)

If a series of commands (up to 16 keystrokes) are programmed in the system’s memory by your installer and the commands are assigned to the “A”, “B”, “C” and “D” keys on a touchpad, you can operate the desired function by selecting “FUNCTION A”, “FUNCTION B”, “FUNCTION C” or “FUNCTION D” through the function menu.

Refer to “Macro Key Programming & Usage” on pages 25 to 26 in the 3000EN Security Systems User’s Guide.

Make sure all perimeter doors and windows are closed and READY is displayed.

Base Unit

1Press [ADT].

2	Scroll to “OTHER FUNCTIONS” by pressing [d]
		gOTHER FUNCTIONS
	or [B], then press [g].
3	Press [g] at “FUNCTIONS A-D”.
		gFUNCTIONS A-D
4	Scroll to the desired function key by pressing
		gFUNCTION A
	[d] or [B].

5Press [g] at your desired selection.

•The function which you set to the function key is performed.

Handset : Press the soft key ( ADT ), and follow steps 2 to 5 above, using the cordless handset. Press [OFF] to go to the standby mode.

23