25
Security Codes & Authority Levels

Adding User Code

Refer to “Security Codes & Authority Levels” on pages 30 to 31 in the 3000EN
Security Systems User’s Guide.
While the security system is armed, you can not turn on this function. To turn
on, disarm the security system (p. 12).
Make sure all perimeter doors and windows are closed and is
displayed.

Ex. To add a user number “08” and its security code

“1234” in the system

(continued)
1Press [ADT].
2Scroll to “OTHER FUNCTIONS” by pressing [
d
]
or [
B
], then press [
g
].
3Scroll to “USER CODES” by pressing [
d
] or [
B
],
then press [
g
].
4Press [
g
] at “ADD USER CODE”.
5Enter the security code for system master.
6Enter the user number of 2 digits (03 to 49),
then press [
g
] (ENTER).
(Ex. To add user number 8, enter “08”.)
7Enter the new security code for the new user.
(Ex. “1234” is entered.)
READY
Base Unit
OTHER FUNCTIONS
g
USER CODES
g
ADD USER CODE
g
ENTER CODE
----
Enter User #
-,-
Enter User #
0,8
=ENTER
READY
g
Example
ENTER NEW CODE
-,-,-,-
ENTER NEW CODE
1,2,3,4
=ENTER
READY
g
Example
SecurityPhone.book 25 ページ 2004年7月21日 水曜日 午後6時58分