SecurityPhone.book 9 ページ 2004年7月21日 水曜日 午後6時58分

Arming the System

Setting the Stay mode

When you want to arm the system while persons stay inside, select this mode.

When you set the Stay mode,

the perimeter zones, such as protected windows and doors, are armed

interior sensors are left disarmed

exit delay begins so that you can leave through the exit/entry door, and

if the protected perimeter windows and doors are opened, an alarm sounds immediately.

Base Unit

1Press [ADT].

2

Press [g] at “ARM”.

 

 

 

 

gARM

 

 

 

 

 

 

 

 

 

 

3

Press [g] at “STAY”.

 

 

 

 

gSTAY

 

 

• The armed STAY message is displayed.

 

 

 

 

 

Example

 

 

 

ARMED ;;;STAY;;;

 

 

 

 

You may exit now

 

 

 

 

 

 

4Press [STOP] to go to the standby mode.

Handset : Press the soft key ( ADT ), and follow steps 2 to 3 above, using the cordless handset. Press [OFF] to go to the standby mode.

• To exit the menu, press [STOP] or [OFF].

To confirm the security mode you set, press [ADT] in the standby mode.

9

Page 9
Image 9
Panasonic K10059 manual Arming the System Setting the Stay mode, Press g at Stay