35
Schedules
: Press the soft key ( ), follow steps 2 to 5 on the previous
page, and enter the user number of 2 digits, using the cordless handset.
Press the soft key ( ). Follow step 7 on the previous page. Press the soft
key ( ), then press [OFF] to go to the standby mode.
Schedules
Refer to “Scheduling” on pages 35 to 36 in the 3000EN Security Systems User’s Guide.
1Press [ADT].
2Scroll to “OTHER FUNCTIONS” by pressing [
d
]
or [
B
], then press [
g
].
3Scroll to “SCHEDULES” by pressing [
d
] or [
B
],
then press [
g
].
4Enter your security code.
• The schedule number is displayed.
• If you entered the wrong security code, the phone
will go back to step 2. Try again from step 2.
5Enter the schedule number (01 to 16), then
press [*].
(Ex. Schedule number is “10”.)
• To quit this mode, press [0] [0], then [STOP].
(continued)
Handset
ADT
OK
OK
Base Unit
OTHER FUNCTIONS
g
SCHEDULES
g
ENTER CODE
----
Enter Sched No.
00=Quit
|
00
Enter Sched No.
00=Quit 10
Example
10 Enter Event
Clear Event 00
SecurityPhone.book 35 ページ ２００４年７月２１日　水曜日　午後６時５８分