13
Setup
Note:
The ink film is completely safe to touch, and will not
rub off on your hands like carbon paper.
8Close the back cover securely by pushing
down on the dotted area at both ends (#).
Close the front cover securely ($).
The following will be displayed while the unit
is checking that there is no slack in the ink
film.
Display: PLEASE WAIT
1
2
Dotted area
Back cover
Front cover
Display
5For replacement only
Remove the stoppers and tags from the new
ink film. Find the “T” shaped gear (blue).
Tags
New ink film
“T” shaped gear (blue) Stopper
Stopper
6Insert the blue core of the front ink film roll
into the right slot of the unit (#). Insert the
“T” shaped gear (blue) into the left slot of
the unit ($).
Insert the rear ink film roll (%).
2Right
slot
Blue core
1
“T” shaped
gear (blue)
3
Left
slot
Rear ink film roll
Front ink
film roll
“T” shaped gear (blue)
Ink film
7Turn the “T” shaped gear (blue) in the
direction of the arrow.
Make sure that the ink film is
wrapped around the blue core
at least once.
Slack Reverse
Tight
Correct
Blue core
The ink film is not wrapped
around the blue core.
Incorrect
KX-FP151/155(E)(009-017) 01.12.19 10:14 AM Page 13