
Jams
Turn the “T” shaped gear (blue) in the | |
5 direction of the arrow. | |
● Make sure that the ink film is | |
wrapped around the blue core | |
at least once. |
|
Correct | Incorrect |
Tight | The ink film is not wrapped |
| |
around the blue core. | “T” shaped gear | ||
Blue core | |||
| (blue) | ||
|
|
Slack Reverse
6 Close the back cover securely by pushing down on the dotted area at both ends (#). Close the front cover securely ($).
Ink film
Dotted area
1
2
Back cover
Front cover
Document jams – sending!
If the unit does not release the document during feeding, remove the jammed document as follows:
1 | Open the front cover by pulling up the centre |
part. | |
2 | Remove the jammed document carefully. |
3 | Close the front cover securely. |
Note:
●Do not pull out the jammed paper forcibly before opening the front cover.
Centre part
Front cover
Jammed document
78