53
Remote Operation (KX-FP155 only)
Erases a specific message
Erases all messages
Changes to TEL mode
Turns ON message transfer
Turns OFF message transfer
Turns ON pager call
Turns OFF pager call
Remote command
The following operations can be performed from a remote location using a touch tone telephone.
Program the remote operation ID (feature #11 on page 63) and set the unit to TAD/FAX
mode before going out (p. 48).
Dial key
Page
Dial key
Remote command Page
Skips the greeting message
Repeats a message
Skips a message
New message playback
All message playback
Re-records a greeting message
Continues operation
Stops re-recording of a greeting
message
0
1
2
4
5
7
8
9
55
54
54
54
54
55
See
note
55
*4
*5
80
81
82
83
84
55
55
55
55
55
55
55

Remote operation card

Please cut out and carry this card for assistance when using the remote operation.
Mailbox Remote Operation Notice of Remote Operation
Fold here
■Recording a message in a
mailbox:
1. Call your unit.
2. Press *and the mailbox
no. (1or 2).
3. Leave a message.
■Retrieving messages from
a mailbox:
1. Call your unit.
2. Press *and the mailbox
no. (1or 2).
3. Enter the mailbox
password .
4. Press the remote
command key (see the
reverse side).
●
81, 82, 83 and
84 cannot be used.
●
The remote operation is
available only from a touch
tone telephone when the
unit is in TAD/FAX mode.
●
When the unit is in TEL
mode, call your unit and wait
for 10 rings. Enter the
remote operation ID within 8
seconds and wait for 3
seconds.
The unit will switch to
TAD/FAX mode.
●
When you press a key,
press firmly.
●
To send a document, press
*9. When a fax tone is
heard, start transmission.

Operating from a remote location!

Note:
●During remote operation, the unit will stop and two beeps will be heard in the following conditions:
— 2 minutes 40 seconds after your unit answered.
— Every 2 minutes 40 seconds after pressing any command key.
To listen to further messages, press 8within 10 seconds after hearing the two beeps.
KX-FP151/155(E)(053-060) 01.12.19 10:11 AM Page 53