60

Option (KX-FP155 only)

Recording your own transfer greeting message
!
The recording time is limited to 16 seconds.
Suggested message:
“This is a transferred message from (your name, business and/ortelephone number). Please enter your remote ID for remote operation.”
Transferring recorded messages to another
telephone!
This feature allows your unit to call a designated telephone number each time an incoming voice
message is recorded. You can retrieve the transferred message during the same call using the
remote operation.
To use this feature, program the transfer telephone number first (feature #60 on page 68) and
set the unit to TAD/FAX mode.
1. An incoming voice message is recorded in your unit.
2. Your unit calls the transfer telephone number.
3. Answer the call with the transfer telephone.
4. Your unit will play the transfer greeting message.
●This message can be changed (see below).
5. Enter the remote operation ID (feature #11
on page 63).
6. Retrieve the message using the remote operation (p. 53–55).
Pre-recorded message:This is a telephone answeringsystem. Please enter your remoteID for remote operation.
1Press p.
Display:
2Press #, then 61.
3Press +or -to select “RECORD”.
4Press w.
5Speak clearly about 20 cm away from the
microphone.
●The display will show the remaining
recording time.
Example:
6When finished recording, press {.
●
The unit will repeat your message. Adjust
the volume using
+or -
.
7Press p.
TRNS__REC. 15s
TRNS-GREETING
RECORD_______[±]
TRNS-GREETING
CHECK________[±]
SYSTEM_SET_UP
PRESS_NAVI.[I H]
To check the transfer greeting message
1. Press p,#61.
2. Press +or -to select “CHECK”.
3. Press w.
●The unit will play the message.
4. Press p.
To erase your own transfer greeting
message
1. Press p,#61.
2. Press +or -to select “ERASE”.
3. Press w.
●Your own message will be erased.
4. Press p.
●When transferring a call, the pre-recorded
transfer greeting message will be played.
KX-FP151/155(E)(053-060) 01.12.19 10:12 AM Page 60