Caller ID
Caller ID service from your phone company!
This unit is compatible with the Caller ID service offered by your local telephone company. To use this feature, you must subscribe to the Caller ID service.
Important:
●This unit is designed in accordance with the “FSK based subscriber line protocol” under the ETS (European Telecommunication Standard) and only supports the basic CLIP (Calling Line Identification Presentation) features.
●This unit will only display the caller’s telephone number and name.
●This unit will not support future additional telephone services.
●This unit cannot support services based on the “DTMF based subscriber line protocol”.
●Depending on the service of the local telephone company, the date/time of the call or the caller’s name may not be displayed.
Change the following ring settings to 2 or more rings beforehand.
—For
—For
How Caller ID is displayed
The calling party’s telephone number or name will be displayed after the first ring. You then have the option of whether or not to answer the call depending on the caller.
The unit will automatically store the caller information (telephone number, name and the time of the call). You can view the caller information (p. 26) and print the caller ID list (p. 80).
Note:
●If the unit is connected to a PBX (Private Branch Exchange) system, you may not receive the caller information. Consult your PBX supplier.
●If the unit cannot receive caller information, the following will be displayed.
OUT OF AREA
PRIVATE CALLER
OR
WITHHELD
The caller dialled from an area which does not provide Caller ID service.
The caller requested not to send caller information.
LONG DISTANCE | The caller made a long distance call. |
|
To confirm caller information using the Caller ID list!
The unit will store information for the most recent 30 callers.
—To print manually, see page 80.
—To print automatically after every 30 new calls, activate feature #26 (p. 64).
25
