KX-P7100
6.1.6.CN7 ( PSU-MAIN Connector )
CN7 (PSU-MAIN Connector)
Pin No. | Signal Name | Description | Direction |
|
|
|
|
1 | nFCTL | Fuser ON/OFF Control | OUT |
2 | 5VGND | GND for +5V | |
3 | +5V | +5V from Power Source (PSU) | IN |
4 | 24VGND | GND for +24V | |
5 | 24VGND | GND for +24V | |
6 | +24V | +24V from Power Source (PSU) | IN |
7 | +24V | +24V from Power Source (PSU) | IN |
|
|
|
|
6.1.7.CN8 ( Door + 24V Interlock SW )
CN8 (Door +24V Interlock SW)
Pin No. | Signal Name | Description | Direction |
|
|
|
|
1 | +24V | +24V Power Source | OUT |
2 | 24VGND | GND for +24V | |
3 | 24VIR | 24V after through Front Door Interlock SW | IN |
|
|
|
|
6.1.8.CN9 ( THERMISTOR )
CN9 (Thermistor)
Pin No. | Signal Name |
| Description | Direction |
|
|
|
|
|
1 | +5V |
| OUT | |
2 | TH | Thermistor |
| IN |
|
|
|
|
|
6.1.9.CN10 ( HVU-MAIN Connector )
CN10 (HVU-MAIN Connector)
Pin No. | Signal Name | Description | Direction |
|
|
|
|
1 | +24VIR | OUT | |
2 | 24VGND | ||
3 | 24VGND | ||
4 | nCHGCTL | Charge Control (on/off) | OUT |
5 | nDBCH | Developer Charge (+/- change) | OUT |
6 | nDB | Developer (+ voltage PWM Pulse) | OUT |
7 | nTRCTL | Transfer Control(+/- change) | OUT |
8 | nTR | Transfer (- voltage PWM Pulse) | OUT |
9 | +5V | OUT | |
10 | nTECTL | Toner Empty LED Control | OUT |
|
|
|
|
83
