KX-P7100
8.4.2.Service Maintenance
8.4.2.1.Maintenance Cycle
The following table shows the service cycle of the main parts.
Item | Average Life |
|
| Service | (x 1000 pages) |
|
| |||
|
| 18 | 36 |
| 54 |
| 72 |
| 90 | 108 |
Fuser Unit | 90,000 pages *1 |
|
|
|
|
|
|
| R |
|
Transfer Roller | 90,000 pages *1 |
|
|
|
|
|
|
| R |
|
Retard Pad Assembly | 90,000 pages |
|
|
|
|
|
|
| R |
|
R:Replace (Service Man Replaceable)
*1 Average life is based on an average of 5% coverage of the printable area and standard density when the recommended media is used ( refer to Example: 5% coverage ). The life of a toner cartridge is varied dependingon the coverage, temperature, humidity or media etc. So the average life cannot be assured. Continuously printing 10% coverage of the printable area will reduce the life of the toner to about half as compared to printing 5% coverage.
8.4.2.2.Lubrication
Lubricate the following parts when they are replaced or cleaned :
Part | Lubrication Point |
Fuser Unit | Drive Gear, Intermediate Gear, Gear shaft |
Main Chassis | Drive Gear, Gear Shaft |
| Refer to the part list for locations. |
8.4.2.3.Recommended Lubrication
Lubricate the following parts when they are replaced or cleaned :
Part Number | Name | Main Part |
Grease | Drive Gear | |
Grease | OPC Gear | |
|
| Fuser Gear |
Grease | Feed Roller | |
Oil | Roller Shaft |
8.4.3.Counter Reset
You are able to reset the counter of the following items, when they are replaced.
Item | Counter Reset |
OPC Drum Unit | Press the CONTINUE button more than 20 seconds. (The error indicator will go off.) |
|
97
