KX-P7100
2.3.Repacking
Prepare the unit before shipping.
Note:
It is highly recommended that users keep the original carton and ALL packing materials. Please follow these instructions when transporting or shipping the printer.
·The printer weights about 10 kg {22 lbs}.
·Please use the original carton and all of the original packing materials.
·Improper repacking of the printer may result in a service charge to remove spilled toner.
·Since the printer uses dry toner, extreme care must be taken when handling. The printer should be handled in the upright ( vertical ) position.
·Do not ship with drum unit installed in printer.
Material Required
·Original cartons and packing materials
·Newspaper or drop cloth
·Shipping tape and scissors
(1)Turn off the printer, remove the power cord and all interface cables.
(2)Open the front cover.
(3)Lift the drum unit up ( 1 ) and slide it out of the printer ( 2 ).
·To avoid possible toner spillage, it is recommended to place the drum unit on newspaper or a drop cloth.
Caution:
−To prevent any damage to the drum unit, observe the following precautions;
−Do not touch the black drum surface illustrated below.
−Do not expose the drum unit to light for more than 5 minutes.
−Do not expose the drum unit to direct sunlight.
−Do not keep the drum unit near dust or dirt.
−Do not place the drum unit in a high humid area.
24
