Panasonic KX-TC1871NZB, KX-TC1871ALB Setting the Remote Code, To check the remote code, Number

Press (FUNCTION/EXIT/CH).

Ò

Setting the Remote Code

The remote code prevents unauthorized people from accessing your unit and listening to your messages. Choose any 2-digit number (00–99). The factory preset remote code is “11”. If you do not program your own remote code, you can use “11”.

Make sure that the unit is in the standby mode.

1

2 Press (Ý) or (Ü) repeatedly until the arrow points to “Program”.

Ringer volume

1Program

431=Yes

3	Press FWD/EDIT (ß) (Yes key).	1Save DIRECT#
		Set recall time
		43	1=Yes
	Press (Ý) or (Ü) repeatedly until the arrow
		1TAD program
4 points to “TAD program”.		43	1=Yes
5	Press FWD/EDIT (ß) (Yes key).
		Answering
	³The base unit display shows the function menu	system setting.
	for the answering system.	See base unit.
6	Press (1).
		Base unit display
	³The current remote code is displayed on the	Remote code
	base unit.		:11
7	Enter a remote code using a 2-digit
	number (00–99).
8	Press FWD/EDIT (ß) (Save key).
	³A beep sounds.

³To return to the standby mode, press (FUNCTION/EXIT/CH).

³If 6 beeps sound during programming, a wrong key was pressed. Enter the correct number.

To check the remote code

Repeat steps 1 to 6.

³The current remote code is displayed on the base unit. When finished, press (FUNCTION/EXIT/CH).

Answering System

75