Panasonic KX-TG2564S One-Touch Dialer, To erase a stored number, Dialing Base\Unit

“One-Touch Dialer

5

6

Press (fl) (Yes key).

Enter a phone number, up to 22 digits.

≥Each time you press (CLEAR), a digit is

erased. To erase all of the digits, press and hold (CLEAR).

≥To move the cursor, press (fi) or (fl).

214=Next

1234567890¢P

214=Next

7

8

Press (›) (Next key).

Press (fl) (Save key).

≥A beep sounds.

≥To store other numbers, repeat from step 4. ≥To exit the programming mode, press (EXIT).

1234567890¢P

3=Edit 1=Save

1234567890¢P

Save DIRECT2

≥If a pause is required for dialing, (PAUSE) can be stored in a phone number

counting as one digit (p. 57) in step 6.

≥You can exit the programming mode any time by pressing (EXIT).

To erase a stored number

Repeat steps 1 through 5 ¤ press and hold (CLEAR) until all of the digits are erased ¤ (›) (Next key) ¤ (fl) (Save key).

Dialing (Base\Unit)

1	Press the required DIRECT button ((DIRECT1), (DIRECT2) or
	(DIRECT3)).

≥If 3 beeps sound, you have not stored the phone numbers in the DIRECT buttons. Store the number.

≥The DIGITAL SP-PHONE indicator lights. ≥The stored number is dialed.

≥Numbers stored in the base unit can only be dialed by the base unit.

≥You can also dial the stored number by pressing (DIGITAL\SP-PHONE)or lifting the handset then pressing the DIRECT button.

48