Directory

3

Enter a name, up to 15 characters, with the

dialing buttons, (fi) or (fl).

 

See the steps for entering names and symbols

 

(p. 41).

 

If a name is not required, press (›) (Next

 

key) and go to step 5.

4

Press (›) (Next key).

5

Enter a phone number, up to 22 digits.

Each time you press

(CLEAR/INTERCOM/HOLD), a digit is erased.

To erase all of the digits, press and hold (CLEAR/INTERCOM/HOLD).

To move the cursor, press (fi) or (fl).

Enter name

214=Next

Enter name

Tom Jones

214=Next

Enter phone no.

0987654321

214=Next

6 Press (›) (Next key).

If you want to change the storing name or number, press (‹) (Edit key) repeatedly to reach the desired display and change it.

7 Press (fl) (Save key). A beep sounds.

To continue storing other items, repeat from step 2.

To exit the programming mode, press (OFF).

Tom Jones

098-765-4321

3=Edit 1=Save

Tom Jones 098-765-4321

If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone

number counting as one digit (p. 57) in step 5.

You can exit the programming mode any time by pressing (OFF).

If the display shows “Directory full” in step 2, the display will return to step 1. Press (OFF) to exit the list. To erase other stored items from the

directory, see page 46.

After the maximum of 50 items has been stored, “Directory full” is also displayed.

If an alarm tone sounds in step 7, the item cannot be stored in the directory. Press (OFF) and try again from step 1.

40

Page 40
Image 40
Panasonic KX-TG2564S operating instructions Directory, Enter a name, up to 15 characters, with, Dialing buttons, fi or fl