Panasonic KX-TG2564S operating instructions General Problem Cause and Remedy

“

Problem Cause and Remedy

You cannot page a cordless handset.

≥The cordless handset is too far from the base unit.

≥The cordless handset is engaged in an outside call or viewing the Caller List/directory list. Try again. Wait until “Portable in use” disappears.

You cannot redial by	≥If the last number dialed was more than
pressing (REDIAL).	32 digits long, the number will not be
	redialed correctly.

General

Problem Cause and Remedy

The unit does not work. ≥Check the settings (p. 10–16). ≥Charge the battery fully (p. 11). ≥Clean the charge contacts and charge

again (p. 12).

≥Install the battery properly (p. 63). ≥Place the cordless handset on the

charger and unplug the AC adaptor of the base unit to reset. Plug in, and try again.

You cannot program items, ≥Programming is not possible while the

such as the dialing mode. unit is in the talk, speakerphone or intercom mode, or when viewing the Caller List/directory list.

≥Do not pause for over 60 seconds while programming.

≥Move closer to the base unit, if you use the cordless handset.

≥Make sure that the unit is not being used.

Useful Information

For assistance, please call: 1-800-211-PANA(7262) 69