Panasonic KX-TG2564S Troubleshooting, Cordless handset Problem Cause and Remedy

Troubleshooting

Cordless handset

Problem Cause and Remedy

“No link to base.

Walk closer to base & try again” is displayed on the cordless handset display and an alarm tone sounds.

≥You are too far from the base unit. Move closer and try again.

≥Raise the base unit antennas.

≥Plug in the AC adaptor of the base unit. ≥The cordless handset may lose

communication with the base unit. Set the security code (p. 59).

Static, sound cuts in/out, fades. Interference from other electrical units.

≥Locate the cordless handset and the base unit away from other electrical appliances (p. 3).

≥Move closer to the base unit. ≥Raise the base unit antennas.

≥Press (fi) to select a clearer channel in the talk or intercom mode.

The cordless handset does	≥The ringer volume is set to OFF. Set to
not ring.	HIGH or LOW (p. 20).
The cordless handset	≥Charge the battery fully (p. 11).
display is blank.

You cannot store a name and phone number in the directory.

≥You cannot store an item in the directory while the base unit is in the talk or intercom mode.

≥Do not pause for over 60 seconds while storing.

While programming or searching, the unit starts to ring and stops the program/search.

≥To answer the call, press . Start again from the beginning after hanging up.

66