the phonebook, a pause is also needed
(page 25).
Example: If you need to dial the line access
number “9” when making outside calls with a PBX:
Base unit / Handset
19 a MPAUSEN
2Dial the phone number.
3Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: MN
Note:
RA 3.5 second pause is inserted each time
MPAUSEN is pressed. Repeat as needed to
create longer pauses.
Answering calls
Using the base unit
When a call is being received, the LINE 1 indicator
and/or LINE 2 indicator on the base unit flashes
rapidly.
1Lift the corded handset or press MN when the
unit rings.
RThe called line is automatically selected. To
change the line selection mode, see
page 14.
RYou can also answer the call by pressing
MLINE 1N or MLINE 2N.
2When you finish talking, place the corded
handset on the cradle. When the
speakerphone is used, press MN.
Using the handset
When a call is being received, the ringer indicator
and and/or flashes rapidly.
1Lift the handset and press MN or M N when
the unit rings.
RThe called line is automatically selected. To
change the line selection mode, see
page 14.
RYou can also answer the call by pressing
MLINE 1N or MLINE 2N.
RYou can also answer the call by pressing
any dial key from 0 to 9, *, or #. (Any
key answer feature)
2When you finish talking, press MOFFN or place
the handset on the charger.
Auto talk
You can answer calls simply by lifting the handset
off the charger. You do not need to press MN.
To turn this feature on, see page 28.
Adjusting the ringer volume
Base unit / Handset
nWhile the unit is ringing for an incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
nProgramming the volume beforehand:
1MMENUN#160
2MbN: Select the desired line. a MSELECTN
3MbN: Select the desired volume. a MSAVEN
4Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN
Temporary ringer off
Base unit / Handset
While the unit is ringing for a call, you can turn the
ringer off temporarily by pressing MN on the base
unit or MOFFN on the handset.
Useful features during a call
Hold
This feature allows you to put an outside call on
hold.
Base unit
1Press MHOLDN during an outside call.
RIf you are using the corded handset, you
can place it on the cradle.
2To release hold, press MLINE 1N or MLINE 2N
that is flashing on the base unit.
Handset
1Press MHOLDN 2 times during an outside call.
16 For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls