Useful Information
Wall mounting
The base unit can be mounted on a wall by changing the wall mounting adaptor’s position.
Note:
R Make sure that the wall and the fixing method are strong enough to support the weight of the unit.
Base unit
1To remove the wall mounting adaptor, push down the release levers (A). Remove the adaptor (B).
3Insert the lower tabs of the adaptor into the unit’s bottom slots (A), then insert by pushing down the levers of the adaptor into the upper slots(B).
R The words “UP WALL” should be facing up.
B
B
A
A
4Mount the unit on a wall then slide down to secure in place.
B
B
A
A
Wall phone plate
2A Turn the adaptor so that the words “UP WALL” are facing up.
B Tuck the telephone line cord inside the wall mounting adaptor.
C Connect the AC adaptor cord and telephone line cord.
3 
1 | 2 |
|
Charger
Drive the screws (not supplied) into the wall.
25.4 mm
(1 inch)
Screws
Hooks
44 | For assistance, please visit http://www.panasonic.com/help |
