Panasonic KX-UT670 Configuring Display Properties, Editing a Preset’s Name, Automatic Mode

Network Camera

Editing a Preset’s Name

1.On the Home screen, tap .

2.In Network Camera Viewer, press .

3.Tap [Preset].

4.In the [Preset] list, touch and hold the preset whose name you want to edit.

5.Tap [Edit Preset Name].

6.Edit the preset’s name as necessary, and then tap [OK].

Note

•Tapping [Cancel] returns you to the [Preset] screen.

•For details about entering text, see page 23.

Deleting a Preset’s Name that You Edited

1.On the Home screen, tap .

2.In Network Camera Viewer, press .

3.Tap [Preset].

4.In the [Preset] list, touch and hold the preset whose name you want to delete.

5.Tap [Delete Preset Name].

Note

•Deleting a preset’s name returns it to the factory default value (Preset).

•Tapping [Cancel] returns you to the [Preset] screen.

Configuring Display Properties

You can adjust the brightness of the network camera and set up automatic mode.

Adjusting the Brightness of the Picture

1.On the Home screen, tap .

2.In Network Camera Viewer, press .

3.Tap [Camera Settings].

4.Tap [Brightness].

5.Tap (brighter) or (darker) to adjust the brightness.

6.Tap [Close] to save the setting.

Note

•Tapping [Reset] in step 5 returns the setting to the value specified in the camera’s settings.

Automatic Mode

Auto Pan

The camera can be set to pan horizontally (left–right) over its entire viewing range repeatedly.

1.On the Home screen, tap .

2.In Network Camera Viewer, press .

3.Tap [Camera Settings].

4.Tap [Auto Mode].

5.On the [Auto Mode] screen, tap [Auto Pan].

Note

•Tapping [Cancel] returns you to the [Camera Settings] screen.

Preset Sequence

You can have the camera cycle through and display viewing positions registered as presets.

1.On the Home screen, tap .

2.In Network Camera Viewer, press .

3.Tap [Camera Settings].

4.Tap [Auto Mode].

64

Operating Instructions Document Version 2011-09