Connections and Installation

When connecting an Ethernet cable

Connect the Ethernet cable as shown in the following figures.

If the distance from the end of the connector to the bend in the cable is 30 mm (1 3/16 in) or less

Ethernet cable

30 mm (1 3/16 in) or less

If the distance from the end of the connector to the bend in the cable is more than 30 mm (1 3/16 in) Remove the cable cover (A) from the back of the stand, and then run the Ethernet cable so the stand lies flat on a horizontal surface.

Ethernet cable

A

98

Operating Instructions

Document Version 2011-09

Page 98
Image 98
Panasonic KX-UT670 operating instructions When connecting an Ethernet cable