Miscellaneous Information

Initializing the Unit

Initializing the unit resets all its settings to their factory default values. For details, consult your administrator or dealer.

Cleaning the Unit

When you clean the unit, turn off the unit by unplugging the AC adaptor and/or disconnecting the Ethernet cable. Cleaning the unit while it is still on can result in erroneous behavior.

However, by enabling cleaning mode, you can wipe the display without turning the unit off (Page 120).

Wipe the unit with a soft and dry cloth.

If the unit becomes particularly dirty, apply a light kitchen cleanser to a soft cloth, wring the cloth thoroughly, and then wipe the unit. When finished, dry the unit with a soft and dry cloth.

Do not clean the unit with cleaners that contain: petroleum, scouring powder, paint thinner, benzene, wax, hot water or powdered soap. When using chemical cleansers, follow the instructions on the label carefully.

When wiping smudges off the display, use a soft and dry cloth. Touch the display only with the fleshy part of your fingers, and avoid touching it with your fingernails.

Enabling Cleaning Mode

To prevent incorrect operation while cleaning the unit, you can set the unit to ignore any operations from the key sheet and the display.

1.On the Home screen, press .

2.Tap [Settings].

3.Tap [Touch panel].

4.Tap [Cleaning mode].

Note

This mode can be enabled only when the unit is idle.

120

Operating Instructions

Document Version 2011-09

Page 120
Image 120
Panasonic KX-UT670 operating instructions Initializing the Unit, Cleaning the Unit, Enabling Cleaning Mode