Panasonic KX-UT670 operating instructions Wall Mounting

Connections and Installation

Wall Mounting

To mount the unit on a wall, you must purchase the wall mount kit (Page 15). If the stand is attached, remove it (Page 96).

Carefully read the safety notices regarding wall mounting before mounting the unit on a wall (Page 6).

Notice

•Use only the washers and screws included with the wall mount kit.

•If you place the display face down when you attach the wall mounting adaptor, be sure to place a soft cloth under the display before attaching the adaptor. Failure to do so may result in damage to the display.

1.Insert the 4 tabs of the wall mounting adaptor into the designated openings in the base (A), and then slide the wall mounting adaptor up until it clicks (B).

A

B

A

Notice

•Ensure that the screw hole (A) shown in the figure above is accessible through the wall mounting adaptor.

2.Fasten the wall mounting adaptor to the base with the screw for the wall mounting adaptor. (Recommended torque: 0.4 N·m [4.08 kgf·cm/3.54 lbf·in] to 0.6 N·m [6.12 kgf·cm/5.31 lbf·in])

Document Version 2011-09 Operating Instructions

101