Panasonic KX-UT670 Receiving Calls, Selecting from Multiple Incoming Calls, Rejecting Calls

Phone

Receiving Calls

1.Go off-hook.

2.To end the call, go on-hook.

Note

•Enabling Automatic Answer allows you to answer an incoming call without going off-hook (Page 85).

•If a network camera is registered in the caller’s contact information, Network Camera Viewer will start, and you can view the video feed from the camera.

•When you receive a call while using another application, the [Incoming Call] window is displayed.

Selecting from Multiple

Incoming Calls

When you have incoming calls from multiple parties at the same time, you can select which one to answer.

1.On the [Incoming] tab, select the call you want to answer.

2.Tap [Answer].

Note

•The number of incoming calls is displayed on the [Incoming] tab.

•In the [Incoming] tab, incoming calls are displayed from the top in the order of oldest to newest.

Answering a Call While on a Call (Answering Call Waiting)

When you receive a second call while on another call, you can answer the second call after either putting the current call on hold or disconnecting it.

Disconnecting the Current Call and Answering the Second Call

1.When you hear the call waiting tone, go on-hook.

2.Go off-hook.

Holding the Current Call and Answering the Second Call

1.On the [Incoming Call] window, tap [Close].

2.On the [Current] tab, tap [Hold].

3.Tap the DN button (flexible button) of the incoming call (flashing green rapidly).

Note

•If automatic call hold is enabled through configuration file programming, simply tapping [Answer] on the [Incoming] window will put the current call on hold and answer the second call. For details, contact your administrator or dealer.

Rejecting Calls

You can reject an incoming call at your unit or set the unit to reject certain calls.

Rejecting a Call While Receiving

1.When receiving an incoming call, press .

Rejecting Anonymous Calls

You can set the unit to reject calls when the unit receives a call without phone number.

To reject anonymous calls, the Block Anonymous Call setting must be enabled through Web user interface programming (Page 93). For details, consult your administrator or dealer.

Note

•Rejected phone numbers will not be stored in the incoming call log.

•Depending on the line an incoming call is arriving on, the call may not be rejected.

Rejecting Specific Calls

You can set the unit to reject specific phone numbers.

50

Operating Instructions Document Version 2011-09