3. Connect the cables to the unit, and run the cables through the wall mounting adaptor, as shown in the
illustration below.
Note
The cables can also be run from the bottom of the unit.
For details about connecting the cables, see page 97.
4. Screw the 2 screws for wall attachment with their washers into the wall as shown in the following figure,
and then mount the unit on the wall.
Washer
Insert the screw to
this point.
83 mm
(3
1

/

4 in)
Note
You can find a wall mounting template at the end of this manual.
5. Remove the handset hook by pushing it firmly upwards.
102 Operating Instructions Document Version 2011-09
Connections and Installation