4.5.3.4 Jitter Buffer

Maximum Delay

Description Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.
Value Range 3–50 (´ 10 ms)
Note
•This setting is subject to the following conditions:
–This value must be greater than [Initial Delay]
–This value must be greater than [Minimum Delay]
–[Initial Delay] must be greater than or equal to [Minimum
Delay]
Default Value 20 (´ 10 ms)
Configuration File Reference MAX_DELAY (Page 285)

Minimum Delay

Description Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
Value Range 1 or 2 (´ 10 ms)
Note
•This setting is subject to the following conditions:
–This value must be less than or equal to [Initial Delay]
–This value must be less than [Maximum Delay]
–[Maximum Delay] must be greater than [Initial Delay]
Default Value 2 (´ 10 ms)
Configuration File Reference MIN_DELAY (Page 286)

Initial Delay

Description Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
Value Range 1–7 (´ 10 ms)
Note
•This setting is subject to the following conditions:
–This value must be greater than or equal to [Minimum
Delay]
–This value must be less than [Maximum Delay]
Default Value 2 (´ 10 ms)
Configuration File Reference NOM_DELAY (Page 286)
122 Administrator Guide Document Version 2014-05
4.5.3 VoIP Settings [Line 1]–[Line n]