Manuals / Brands / Communications / Telephone / Panasonic / Communications / Telephone

Panasonic KX-UTG200, KX-UTG300 4.5.3.5 DTMF, 4.5.3.6 Call Hold

1 348

Download 348 pages, 10.84 Mb

4.5.3.5 DTMF

DTMF Type

Description Selects the method for transmitting DTMF (Dual Tone Multi-Frequency)

tones.

Value Range •Inband

•RTP Event (2833)

•None

Note

•If you select RTP Event (2833), DTMF tones will be sent via

2833 event.

Default Value RTP Event (2833)

Configuration File Reference DTMF_MODE (Page 287)

DTMF Relay

Description Specifies whether DTMF relay is enabled or disabled.

Value Range •Yes

•No

Note

•When set to "Yes", DTMF tones will be sent through SDP

regardless of the DTMF Type setting.

Default Value No

Telephone-event Payload Type

Description Specifies the RFC 2833 payload type for DTMF tones.

Value Range 96–127

Default Value 101

Configuration File Reference TELEVENT_PAYLOAD (Page 287)

4.5.3.6 Call Hold

Supports RFC 2543 (c=0.0.0.0)

Description Selects whether to enable the RFC 2543 Call Hold feature on this line.

Document Version 2014-05 Administrator Guide 123

4.5.3 VoIP Settings [Line 1]–[Line n]

Contents

Main Introduction Page Table of Contents 3 Phone User Interface Programming .....................................................53 4 Web User Interface Programming ........................................................55 Page Page Page Page Page Page Page Page Page 5 Configuration File Programming ........................................................205 Page Page Page Page Page Page 6 Useful Telephone Functions ...............................................................317 Page 1.1 Setup 1.1.1 Factory Defaults 1.1.2 Basic Network Setup TCP/IP Settings (DHCP or Static IP Address Assignment) Configuring the Network Settings of the Unit 1.1.3 Overview of Programming 1.1.4 Phone User Interface Programming 1.1.5 Web User Interface Programming Router Switching Hub PC SIP Phone 1.1.5.1 Password for Web User Interface Programming Opening/Closing the Web Port Access Levels (IDs and Passwords) 1.1.5.3 Accessing the Web User Interface 4. Controls on the Window A D B C Entering Characters Result Messages 1.1.6 Other Network Settings 1.1.6.1 Global Address Detection 1.1.6.2 802.1x 1.1.6.3 LLDP 1.2 Reset 1.2.1 Reset 1.2.1.1 Resetting to Factory Default (Factory Setting) 1.2.1.2 Resetting Settings Except Private Settings 1.2.1.3 Resetting Settings Except Network Settings 1.3 Phonebook Page 2.1 What is Provisioning? 2.2 Provisioning URL Settings Priority of the different methods Information included when specifying the provision URL Valid URL formats 2.2.1 Automatic Discovery of the Provisioning URL 2.2.1.1 SIP PnP Examples Conditions 2.2.1.2 DHCP Option 160/159/66 Conditions 2.2.1.3 DHCPv6 Sub-option 2.2.1.4 Redirection Server A B C Customer Carrier D E F G 2.2.2 Manual Configuration of the Provisioning URL 2.2.2.1 Web User Interface, Phone User Interface 2.3 Processing Flow of Provisioning URL Setting Selection Flowchart (for IPv4 only) 2.4 Configuration File 2.4.1 Configuration File Format 2.4.2 Flexible Enabling/Disabling of Parameters 1. 2. 2.4.3 Device Configuration File Types 2.4.4 Priority Given to Each Programming Method 2.4.5 Timing of Configuration File Downloads 2.5 Processing Flow of Configuration File Download Sequence 2.6 Secure Provisioning 2.6.1 Using Encryption When Transferring Configuration Files Provisioning Server Requirements 1. Page 2.6.2 Using HTTPS When Transferring Configuration Files For more information about the related parameters 2.7 Firmware Updates 2.7.1 Updating the Units Firmware 2.7.2 Updating the KX-UTA336 Add-on Key Module's Firmware 2.8 DHCP Provisioning A B C D Page 3.1 Phone User Interface Programming 3.1.1 Phone User Interface Feature List and Direct Commands 3.1.2 Port Mirroring Settings 3.1.3 Disabling the Touch Screen Page 4.1 Web User Interface Setting List Status Page Network Page System VoIP Page Telephone Page Page Page Page Application Maintenance Page Diagnostic Page 4.2 Status 4.2.1 Version Information 4.2.1.1 Version Information Model Operating Bank 4.2.2 Network Status 4.2.2.1 Network Status MAC Address Ethernet Link Status (LAN Port) Ethernet Link Status (PC Port) IP Address Mode Connection Mode IP Address Subnet Mask DNS1 DNS2 IPv6 Connection Mode IPv6 Address IPv6 Prefix Length IPv6 Default Gateway IPv6 DNS1 IPv6 DNS2 IP Phone VLAN ID 4.2.3 VoIP Status 4.2.3.1 VoIP Status Line No. VoIP Status Default Line 4.2.4 QoS Status 4.2.4.1 QoS Status 4.3 Network 4.3.1 Basic Network Settings 4.3.1.1 Connection Settings Host Name IP Address Mode Signal Prefer Mode Media Prefer Mode 4.3.2 IPv4 Network Settings 4.3.2.1 Connection Settings IP Connection Mode DNS Connection Mode 4.3.2.2 Static Settings Static IP Address Subnet Mask Default Gateway DNS1 4.3.3 IPv6 Network Settings 4.3.3.1 Connection Settings IPv6 Connection Mode IPv6 DNS Connection Mode Allow Auto Configuration Enable IPv6 Privacy 4.3.4 Ethernet Port Settings 4.3.4.1 Link Speed/Duplex Mode LAN Port PC Port 4.3.4.2 LLDP Settings Enable LLDP LLDP-MED Interval Timer 4.3.4.3 CDP Settings Enable CDP 4.3.4.4 VLAN Settings Enable IP Phone VLAN IP Phone VLAN ID Enable PC VLAN PC VLAN ID 4.3.5 IEEE802.1X Settings 4.3.5.1 IEEE802.1X Settings Enable IEEE802.1X 4.3.5.2 IEEE802.1X Authentication Authentication Protocol 4.3.6 Certificate Information 4.3.6.1 Certificate Information Built-in Device Certificate Page 4.3.7 HTTP Client Settings 4.3.7.1 HTTP Client Settings HTTP Version HTTP User Agent 4.3.7.2 HTTP Authentication 4.3.7.3 Proxy Server Settings Enable Proxy Proxy Server Address Proxy Server Port 4.3.8 Global Address Detection 4.3.8.1 STUN Server STUN Server Address STUN Server Port STUN Interval 4.4 System 4.4.1 Web Language 4.4.1.1 Web Language Language 4.4.2 Administrator Password 4.4.2.1 Administrator Password Current Password New Password Confirm New Password 4.4.3 User Password 4.4.3.1 User Password Current Password New Password Confirm New Password 4.4.4 Web Server Settings 4.4.4.1 Web Server Settings Web Server Port Port Close Timer 4.4.5 Time Adjust Settings 4.4.5.1 Synchronization Synchronization by NTP Synchronization Interval NTP Server Address 4.4.5.2 Daylight Saving Time Enable DST DST Offset 4.4.5.3 Start Day and Time of DST Month Day Week Time 4.4.5.4 End Day and Time of DST Month Day Week Time 4.5 VoIP 4.5.1 SIP Settings [Line 1][Line n] 4.5.1.1 Line 1 Enable Line 4.5.1.2 Phone Number SIP URI 4.5.1.3 SIP Server Registrar Server Address Registrar Server Port Proxy Server Address Proxy Server Port 4.5.1.4 Outbound Proxy Server Outbound Proxy Server Address Outbound Proxy Server Port 4.5.1.5 SIP Service Domain Service Domain 4.5.1.6 SIP Source Port Source Port 4.5.1.7 SIP Authentication 4.5.1.8 SIP Settings SIP User Agent 4.5.1.9 DNS Enable DNS SRV lookup 4.5.1.10 Transport Protocol for SIP Transport Protocol 4.5.1.11 Timer Settings T1 Timer T2 Timer Timer B (milliseconds) Timer D (milliseconds) 4.5.1.12 Quality of Service (QoS) SIP Packet QoS (DSCP) 4.5.1.13 SIP extensions Supports 100rel (RFC 3262) Supports Session Timer (RFC 4028) 4.5.1.14 NAT Identity Keep Alive Interval Supports Rport (RFC 3581) STUN 4.5.1.15 Security Enable SSAF (SIP Source Address Filter) 4.5.2 VoIP Settings 4.5.2.1 RTP Settings RTP Packet Time Minimum RTP Port Number 4.5.3 VoIP Settings [Line 1][Line n] 4.5.3.1 Max Connection Max Connection 4.5.3.2 Quality of Service (QoS) RTP Packet QoS (DSCP) RTCP Packet QoS (DSCP) 4.5.3.3 Statistical Information RTCP Enable 4.5.3.4 Jitter Buffer Maximum Delay Minimum Delay Initial Delay 4.5.3.5 DTMF DTMF Type DTMF Relay Telephone-event Payload Type 4.5.3.6 Call Hold 4.5.3.7 CODEC Preferences G722 (Enable) G722 (Priority) PCMA (Enable) PCMA (Priority) G72632 (Enable) G72632 (Priority) G729A (Enable) G729A (Priority) G729A (Annexb) 4.5.3.8 NAT Identity RTP Keep Alive Interval 4.6 Telephone 4.6.1 Call Control 4.6.1.1 Call Control Inter-digit Timeout Timer for Dial Plan International Call Prefix Country Calling Code National Access Code Hold Recall Timer Default Line 4.6.2 Call Control [Line 1][Line n] 4.6.2.1 Call Control Display Name Send SUBSCRIBE to Voice Mail Server Voice Mail Access Number Enable Shared Call Feature Key Synchronization Conference Server URI Resource List URI MoH Server URI 4.6.2.2 Dial Plan Dial Plan Call Even If Dial Plan Does Not Match 4.6.2.3 Call Features Block Caller ID Block Anonymous Call Do Not Disturb Return Code When DND Return Code When Refuse Auto Answer 4.6.2.4 Call Forward Unconditional (Enable Call Forward) Unconditional (Phone Number) Busy (Enable Call Forward) Busy (Phone Number) No Answer (Enable Call Forward) No Answer (Phone Number) No Answer (Ring Count) 4.6.2.5 Call Park & Call Pickup Call Park (Enable) Call Park (Code) Call Park Retrieve (Enable) Call Park Retrieve (Code) Call Park Subscribe Enable Call Pickup (Enable) Call Pickup (Code) Group Pickup (Enable) Group Pickup (Code) Directed Call Pickup (Enable) Directed Call Pickup (Code) 4.6.3 Flexible Button Settings 4.6.3.1 Flexible Button Settings Type (No. 124) Line (No. 1-24) Parameter (No. 124) 4.6.4 Flexible Button Settings (KEM) (KX-UTG300 only) 4.6.4.1 KEM 1 Type (No. 136) Line (No. 1-36) Parameter (No. 136) Label Name (No. 136) 4.6.4.2 KEM 2 Type (No. 136) Line (No. 1-36) Parameter (No. 136) Label Name (No. 136) 4.6.5 Bluetooth (KX-UTG300 only) 4.6.5.1 Bluetooth Enable Bluetooth 4.6.6 Tone Settings 4.6.6.1 Dial Tone 4.6.6.2 Busy Tone 4.6.6.3 Ringing Tone 4.6.6.4 Stutter Tone 4.6.6.5 Reorder Tone 4.6.7 Telephone Settings 4.6.7.1 Telephone Settings Key Click Tone Extension PIN Number Matching Lower Digit No Operation Timer Enable URL Dialing Enable Recording 4.6.7.2 Hotline Enable Hotline Delay Time (0-10) 4.6.7.3 Multicast Paging Enable Multicast Paging Disconnect Paging Timeout Paging Codec Paging DND Address (No. 1-10) Port (No. 1-10) 4.6.8 Phonebook 4.6.8.1 Import Phonebook 4.6.8.2 Export Phonebook 4.6.9 LDAP 4.6.9.1 LDAP Enable LDAP LDAP Server Address LDAP Server Port Page Page 4.6.12 Screen Saver 4.7 Application 4.7.1 Application Settings 4.7.1.1 Application Settings Enable Application Application Server 4.7.2 Broadsoft Settings [Remote Office] 4.7.2.1 Remote Office Settings Enable Remote office Remote Phone Number 4.7.3 Broadsoft Settings [Hide Number] 4.7.3.1 Hide Number Settings Enable Hide Number (Caller ID Blocking) 4.7.4 Broadsoft Settings [Simultaneous Ring] 4.7.4.1 Simultaneous Ring Settings Enable Simultaneous Ring Do not ring my Simultaneous Ring Numbers if I'm already on a call Phone Number (1-10) 4.7.5 Broadsoft Settings [Anywhere] 4.7.5.1 Anywhere Settings Alert all locations for Click-to-Dial calls 4.7.5.2 Location Settings Action 4.7.5.3 Phone Number Require Answer Confirmation Use BroadWorks-based Call Control Services 4.7.6 Branding Settings 4.7.6.1 Branding Settings Logo URL Wallpaper URL 4.8 Maintenance 4.8.1 Import Configuration File 4.8.1.1 Web Configuration 4.8.2 Export Configuration File 4.8.3 Firmware Maintenance 4.8.3.1 Firmware Maintenance Enable Firmware Update Firmware File URL 4.8.4 Local Firmware Update 4.8.4.1 Local Firmware Update 4.8.5 KEM Firmware Update 4.8.5.1 KEM Firmware Update 4.8.6 Provisioning Maintenance 4.8.6.1 Provisioning Maintenance Enable Provisioning Provision Server Enable SIP PnP Enable DHCP Option 160 Enable DHCP Option 159 Enable DHCP Option 66 Enable DHCPv6 Sub Option 1 Cyclic Auto Resync Resync Interval Header Value for Resync Event 4.8.7 Management Server 4.8.7.1 Management Server Management Server URL 4.8.8 SNMP 4.8.8.1 SNMP Enable SNMP 4.8.8.2 SNMP v1/v2c 4.8.8.3 SNMP v3 SNMP Auth Type SNMP Auth Password SNMP Encrypt Type SNMP Encrypt Password SNMP Security Level 4.8.9 SSH 4.8.9.1 SSH Enable SSH 4.8.10 Reset & Restart 4.9 Diagnostic 4.9.1 Log Settings 4.9.1.1 General Settings Log to standard output Log to file Log file max size 4.9.1.2 Upload Settings 4.9.1.3 Syslog Settings Report log to sysLog server SysLog server SysLog port SysLog severity 4.9.1.4 Log Level Settings All CENTRAL DHCPv4 DHCPv6 FHAL HTTP Server HTTP CGI I18N IPPS LLDPCDP MCABBER_CLIENT MCU MMI NETWORK_CONTROL PCU PJCU-1 PJCU-2 PJCU-3 PJCU-4 PJCU-5 (KX-UTG300 only) PJCU-6 (KX-UTG300 only) PROVISION SIP_PNP SWITCH_CONF UPGRADER CONFIGSYS DCM FDT NTP FILESAVER FOS DNS FTPC NET SUU PHONE_BOOK CALL_HISTORY ACU XML_APP WPA_SUPPLICANT TR-069 SNMP CERTIFICATE 4.9.2 Log Display 4.9.2.1 Filter Modules Page Classes 4.9.2.2 Log Log 4.9.3 Log Dump 4.9.3.1 Log Dump 4.9.4 System Dump 4.9.4.1 Running Information 4.9.5 Sniffer Dump 4.9.5.1 Sniffer Log Enable Log Page 5.1 Configuration File Parameter List System Settings Page Network Settings Telephone Settings Page Page Page All Line Settings Per Line Settings Page Page Page SSH Settings 5.2 General Information on the Configuration Files 5.2.1 Configuration File Parameters Parameter Name Value Format 5.2.2 Characters Available for String Values 5.2.3 XML Formatting Basics Predefined Entities of XML 5.3 System Settings 5.3.1 Login Account Settings ADMIN_ID ADMIN_PASS USER_ID 5.3.2 System Time Settings TIME_ZONE DST_ENABLE DST_OFFSET DST_START_MONTH DST_START_ORDINAL_DAY DST_START_DAY_OF_WEEK DST_START_TIME DST_STOP_MONTH DST_STOP_ORDINAL_DAY DST_STOP_DAY_OF_WEEK DST_STOP_TIME 5.3.3 Syslog Settings SYSLOG_ADDR SYSLOG_PORT SYSLOG_SERVER_ENABLE SYSLOG_SEVERITY 5.3.4 KEM (KX-UTA336 Add-on Key Module) Update Settings KEM_UPGRADE_ENABLE KEM_VERSION KEM_FILE_PATH KEM_UPGRADE_AUTO 5.3.5 Firmware Update Settings FIRM_UPGRADE_ENABLE FIRM_VERSION FIRM_FILE_PATH FIRM_UPGRADE_SUPPORT_IMAGE_MODE 5.3.6 Provisioning Settings PROVISION_ENABLE OPTION160_ENABLE OPTION159_ENABLE OPTION66_ENABLE IPV6_SUB_OPTION_ENABLE SIPPNP_ENABLE CFG_STANDARD_FILE_PATH CFG_PRODUCT_FILE_PATH CFG_MASTER_FILE_PATH CFG_FILE_KEY CFG_FILE_KEY_LENGTH CFG_CYCLIC CFG_CYCLIC_INTVL CFG_RTRY_INTVL CFG_RESYNC_TIME CFG_RESYNC_FROM_SIP USR_PROV_SVR_URL USR_PROV_SVR_AUTH_ID USR_PROV_SVR_AUTH_PASSWORD CFG_ROOT_CERTIFICATE_PATH1 CFG_ROOT_CERTIFICATE_PATH2 CFG_ROOT_CERTIFICATE_PATH3 SIPPNP_MULTICAST_ADDR SIPPNP_PORT CLIENT_CERTIFICATE_PATH CLIENT_KEY_PATH 5.3.7 Management Server Settings ACS_URL ACS_USER_ID ACS_PASS PERIODIC_INFORM_ENABLE 5.3.8 SNMP Settings SNMP_ENABLE SNMP_TRUST_IP SNMP_PORT SNMP_COMMUNITY_STRING SNMP_SECURITY_USER SNMP_SECURITY_LEVEL SNMP_AUTH_TYPE SNMP_AUTH_PASSWORD SNMP_ENCRYPT_TYPE SNMP_ENCRYPT_PASSWORD 5.4 Network Settings 5.4.1 IP Settings IP_ADDR_MODE ALLOW_AUTO_CFG 5.4.2 LLDP-MED Settings LLDP_TRAFFIC_TO_PC_PORT LLDP_ASSTID LLDP_POWER_PRIORITY LLDP_ENABLE LLDP_INTERVAL 5.4.3 CDP Settings CDP_TRAFFIC_TO_PC_PORT CDP_ENABLE CDP_INTERVAL 5.4.4 IEEE 802.1X Settings 5.4.5 HTTP Settings HTTPD_PORTOPEN_AUTO HTTP_VER HTTP_USER_AGENT HTTP_SSL_VERIFY 5.4.6 Time Adjust Settings NTP_MODE NTP_ADDR TIME_SYNC_INTVL TIME_QUERY_INTVL 5.4.7 STUN Settings STUN_SERV_ADDR STUN_SERV_PORT STUN_REFRESH_INTVL 5.4.8 LDAP Settings LDAP_SERVER LDAP_PORT LDAP_SEARCH_BASE_DN LDAP_ENABLE 5.4.9 VLAN Settings IP_PHONE_VLAN_ENABLE PC_VLAN_ENABLE IP_PHONE_VLAN_ID PC_VLAN_ID 5.5 Telephone Settings 5.5.1 Call Control Settings FIRSTDIGIT_TIM INTDIGIT_TIM MACRODIGIT_TIM INTERNATIONAL_ACCESS_CODE COUNTRY_CALLING_CODE NATIONAL_ACCESS_CODE HOLD_RECALL_TIM AUTO_ANS_RING_TIM ONHOOK_TRANSFER_ENABLE KEY_PAD_TONE ENDCALL_TRANSFER_ENABLE FOLLOW_SERVER_BELLCORE BUSY_ON_CALL_END REORDER_TONE_TIM 5.5.2 Telephone Settings NUMBER_MATCHING_LOWER_DIGIT DISPLAY_DATE_PATTERN DISPLAY_TIME_PATTERN DEFAULT_LINE DEFAULT_LANGUAGE EXTENSION_PIN POUND_KEY_DELIMITER_ENABLE NO_OPERATION_TIMER URL_DIALING_ENABLE SCREEN_SAVE_TIMER RECORDING_ENABLE CID_DATA_PRIORITY_ENABLE 5.5.3 Instant Message & Presence IM_PRESENCE_ENABLE 5.5.4 Multicast paging MPAGE_ADDR MPAGE_PORT MPAGE_PRIORITY MPAGE_LABEL MPAGE_SEND_ENABLE MPAGE_ENABLE MPAGE_SEND_TIMER MPAGE_CODEC MPAGE_DISC_TIM MPAGE_DND_ENABLE 5.5.5 Hotline Settings HOT_LINE_ENABLE HOT_LINE_NUMBER HOT_LINE_DELAY_TIME 5.5.6 Tone Settings DIAL_TONE1_GAIN DIAL_TONE1_RPT DIAL_TONE1_TIMING DIAL_TONE2_FRQ DIAL_TONE2_GAIN DIAL_TONE2_RPT DIAL_TONE2_TIMING BUSY_TONE_FRQ BUSY_TONE_GAIN BUSY_TONE_RPT BUSY_TONE_TIMING RINGBACK_TONE_FRQ RINGBACK_TONE_GAIN RINGBACK_TONE_RPT RINGBACK_TONE_TIMING DIAL_TONE4_FRQ DIAL_TONE4_GAIN DIAL_TONE4_RPT DIAL_TONE4_TIMING REORDER_TONE_FRQ REORDER_TONE_GAIN REORDER_TONE_RPT REORDER_TONE_TIMING HOLD_TONE_FRQ HOLD_TONE_GAIN HOLD_TONE_RPT HOLD_TONE_TIMING HOLD_ALARM_FRQ HOLD_ALARM_GAIN HOLD_ALARM_RPT HOLD_ALARM_TIMING CW_TONE1_FRQ CW_TONE1_GAIN CW_TONE1_RPT CW_TONE1_TIMING BELL_CORE_PATTERN1_TIMING BELL_CORE_PATTERN2_TIMING BELL_CORE_PATTERN3_TIMING BELL_CORE_PATTERN4_TIMING BELL_CORE_PATTERN5_TIMING 5.5.7 Flexible Button Settings FLEX_BUTTON_FACILITY_ACT FLEX_BUTTON_FACILITY_ARG FLEX_BUTTON_LABEL FLEX_BUTTON_LINE 5.5.8 KEM1 (KX-UTA336 Add-on Key Module 1) Button Settings KEM1_BUTTON_FACILITY_ACT KEM1_BUTTON_FACILITY_ARG KEM1_BUTTON_FACILITY_LABEL KEM1_BUTTON_FACILITY_LINE 5.5.9 KEM2 (KX-UTA336 Add-on Key Module 2) Button Settings KEM2_BUTTON_FACILITY_ACT KEM2_BUTTON_FACILITY_ARG KEM2_BUTTON_FACILITY_LABEL KEM2_BUTTON_FACILITY_LINE 5.5.10 XML Application Settings XMLAPP_ENABLE XMLAPP_USERID XMLAPP_USERPASS XMLAPP_SERVER_TYPE XMLAPP_SERVICEURL XMLAPP_LOGO_URL XMLAPP_WALLPAPER_URL 5.6 All Lines Settings 5.6.1 All Lines - Codec Settings CODEC_G729_PARAM 5.6.2 All Lines - VoIP Settings RTP_PORT_MIN RTP_PTIME OUTBANDDTMF_VOL INBANDDTMF_VOL 5.6.3 All Lines - Call Control Settings 5.7 Per Line Settings 5.7.1 Per Line - VoIP CODEC_ENABLE_G722 CODEC_ENABLE_PCMA CODEC_ENABLE_G726_32 CODEC_ENABLE_G729A CODEC_ENABLE_PCMU CODEC_PRIORITY_G722 CODEC_PRIORITY_PCMA CODEC_PRIORITY_G726_32 CODEC_PRIORITY_G729A CODEC_PRIORITY_PCMU CODEC_ANNEXB_G729A DSCP_RTP DSCP_RTCP RTCP_INTVL MAX_DELAY MIN_DELAY NOM_DELAY RTCP_ENABLE RTCPXR_ENABLE RTP_CLOSE_ENABLE DTMF_RELAY DTMF_MODE TELEVENT_PAYLOAD RFC2543_HOLD_ENABLE MAX_CONNECTION VQM_PUBLISH RTCPXR_IN_SDP_ENABLE 5.7.2 Per Line - Call Control Settings VM_SUBSCRIBE_ENABLE CONFERENCE_SERVER_URI DISPLAY_NAME VM_NUMBER DIAL_PLAN DIAL_PLAN_NOT_MATCH_ENABLE SHARED_CALL_ENABLE CALLPARK_SUBSCRIBE_ENABLE FEATURE_KEY_SYNCHRO_ENABLE RESOURCELIST_URI CW_ENABLE BLOCK_CALLER_ID BLOCK_ANONYMOUS_CALL DND_ENABLE FWD_UNCONDITIONAL_ENABLE FWD_UNCONDITIONAL_NUMBER FWD_BUSY_ENABLE FWD_BUSY_NUMBER FWD_NO_ANSWER_ENABLE FWD_NO_ANSWER_NUMBER FWD_NO_ANSWER_TIMEOUT PARK_ENABLE PARK_CODE PARK_RETRIEVE_ENABLE PARK_RETRIEVE_CODE PICKUP_ENABLE PICKUP_CODE GPICKUP_ENABLE GPICKUP_CODE DPICKUP_ENABLE DPICKUP_CODE TALK_PACKAGE HOLD_PACKAGE EMERGENCY_NUMBER ACD_ENABLE ACD_CCSTATUS_ENABLE ACD_REASONCODE_ACTIVE[1-10] ACD_REASONCODEAME[1-10] ACD_REASONCODE_VALUE[1-10] HOTELING_ENABLE MOH_SERVER_URI 5.7.3 Per Line - SIP Settings PHONE_NUMBER SIP_URI LINE_ENABLE SIP_USER_AGENT SIP_AUTHID SIP_PASS SIP_SRC_PORT SIP_PRXY_ADDR SIP_PRXY_PORT SIP_RGSTR_ADDR SIP_RGSTR_PORT SIP_SVCDOMAIN REG_EXPIRE_TIME REG_INTERVAL_RATE SIP_SESSION_TIME DSCP_SIP SIP_TIMER_T1 SIP_TIMER_T2 SIP_TIMER_T4 SIP_FOVR_NORSP SIP_FOVR_MAX SIP_DNSSRV_ENA SIP_UDP_SRV_PREFIX SIP_TCP_SRV_PREFIX SIP_100REL_ENABLE SIP_INVITE_EXPIRE SIP_PRSNC_ADDR SIP_PRSNC_PORT PORT_PUNCH_INTVL SIP_ADD_RPORT SIP_STUN_ENABLE SIP_RTP_KA_INTVL SIP_SUBS_EXPIRE SUB_RTX_INTVL REG_RTX_INTVL SIP_PRIVACY SIP_OUTPROXY_ADDR SIP_OUTPROXY_PORT SIP_TRANSPORT SIP_ANM_DISPNAME SIP_ANM_USERNAME SIP_ANM_HOSTNAME SIP_DETECT_SSAF SIP_TIMER_B SIP_TIMER_D SIP_TIMER_F SIP_TIMER_H SIP_TIMER_J ADD_TRANSPORT_UDP SIP_RESPONSE_CODE_DND SIP_RESPONSE_CODE_CALL_REJECT SIP_FOVR_MODE SIP_403_REG_SUB_RTX SIP_DUAL_STACK_SDP_MODE AUTH_INCOMING_INVITE SIP_RINGIN_TIMER SIP_2NDPROXY_ADDR 5.8 SSH Settings SSH_ACCESS_DISABLE Page 6.1 Phonebook Import and Export Editing Phonebook Data on a PC A B A 6.1.1 Import/Export Operation To import phonebook data 1. 2. 3. To export the phonebook data 1. 2. 3. 6.2 Dial Plan [Dial Plan Flowchart] 6.2.1 Dial Plan Settings When a user dials a single digit on a unit, the following sequence of events begins. B 6.2.1 Dial Plan Settings To set Dial Plan 1. 2. The dial plan settings can be configured for each line separately. Document Version 2014-05 Administrator Guide 321 3. Available Values for the Dial Plan Field Dial Plan Example No Match: 6.3 Flexible Buttons Flexible Button Icons Using Flexible Buttons with the KX-UTA336 Add-on Key Module (KX-UTG300 only) 6.3.1 Flexible Button Settings To set Flexible Buttons 1. 2. Page Page 7.1 Troubleshooting Page Checking the Status of the Unit 7.2 Diagnostic Settings 7.2.1 Log Settings Log Level Settings 7.2.2 Log Display 7.2.3 Log Dump 7.2.4 System Dump 7.2.5 Sniffer Dump 7.3 QoS Status (Voice Quality Monitoring) 7.4 Importing/Exporting settings 7.5 SSH Settings (Debug Settings) Page Page 8.1 Revision History 8.1.1 12.1.1 Software File Version 02.110 New Contents Changed Contents Page Page Numerics A B C D E F G H I J K L M N O P Q R S Page T U V W X