4.6.2.4 Call Forward

Unconditional (Enable Call Forward)

Description Selects whether to forward all incoming calls to a specified destination.
Note
•If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [Yes] for this setting.
•If you have selected [Yes] for this setting and Call Forward has
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
•If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected [No] for this setting.
•You can synchronize the Do Not Disturb and Call Forward
settings from the Web user interface (® see [Feature Key
Synchronization] in 4.6.2.1 Call Control) or through
configuration file programming (® see
"FEATURE_KEY_SYNCHRO_ENABLE" in 5.7.2 Per Line - Call
Control Settings).
•If you change this setting when [Feature Key
Synchronization] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range •Yes
•No
Default Value No
Configuration File Reference FWD_UNCONDITIONAL_ENABLE (Page 293)

Unconditional (Phone Number)

Description Specifies the phone number of the destination to forward all incoming
calls to.
Note
•If you change this setting when [Feature Key
Synchronization] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range Max. 127 characters
Note
•You cannot leave this field empty if [Unconditional (Enable
Call Forward)] is set to [Yes].
Default Value Not stored.
136 Administrator Guide Document Version 2014-05
4.6.2 Call Control [Line 1]–[Line n]