HOLD_TONE_FRQ
Value Format Comma-separated Integer
Description Specifies the dual-tone frequencies, in hertz, of the hold tone using 2
whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 425
HOLD_TONE_GAIN
Value Format Integer
Description Specifies the gain, in decibels, of the hold tone.
Value Range (-80)–0
Default Value 0
HOLD_TONE_RPT
Value Format Boolean
Description Specifies whether the hold tone is repeated.
Value Range •Y (Repeat)
•N (No Repeat)
Default Value Y
HOLD_TONE_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of the hold tone using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
•It is recommended that you set a value of 500 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Note
•Avoid setting 1–50 for any of the values.
Default Value 500,190,190,190,2890
HOLD_ALARM_FRQ
Value Format Comma-separated Integer
Document Version 2014-05 Administrator Guide 271
5.5.6 Tone Settings