Value Range Max. 1024 characters
Note
•The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–"<user>" must be less than 127 characters.
–"<password>" must be less than 127 characters.
–"<user>:<password>@" may be empty.
–":<port>" can be omitted if you do not need to specify the
port number.
•If "{mac}" is included in this URL, it will be replaced with the
unit’s MAC address in lower-case.
•If "{MAC}" is included in this URL, it will be replaced with the
unit’s MAC address in upper-case.
•If "{MODEL}" is included in this URL, it will be replaced with the
unit’s model name.
•If "{fwver}" is included in this URL, it will be replaced with the
unit’s firmware version.
•If this URL ends with "/" (slash), "sip.cfg" is automatically added
at the end of the URL.
For example, CFG_MASTER_FILE_PATH="http://host/
dir/" becomes CFG_MASTER_FILE_PATH="http://
host/dir/sip.cfg".
Default Value Empty string
Note
•The URL specified by your phone system dealer may be preset
in the unit.
CFG_FILE_KEY
Value Format String
Description Specifies the encryption key (password) used to decrypt configuration
files.
Note
•If the extension of the configuration file is ".enc", the
configuration file will be decrypted using this key.
Value Range Max. 32 characters
Note
•If an empty string is set for this parameter, decryption with this
value is disabled.
Default Value Empty string
CFG_FILE_KEY_LENGTH
Value Format Integer
234 Administrator Guide Document Version 2014-05
5.3.6 Provisioning Settings