Account Target User ID
(default)
Password
(default) Password Restrictions
User End users user userpass •When logged in as User, you can
change the password for the
User account (® see 4.4.3 User
Password).
•The password can consist of 6 to
16 ASCII characters
(case-sensitive) (® see
Entering Characters in
1.1.5.3 Accessing the Web
User Interface).
Administrator Network
administrators,
etc.
admin adminpass •When logged in as Administrator,
you can change the password for
both the User and Administrator
accounts (® see
4.4.2 Administrator
Password).
•The password can consist of 6 to
16 ASCII characters
(case-sensitive) (® see
Entering Characters in
1.1.5.3 Accessing the Web
User Interface).
Notice
•Only one account can be logged in to the Web user interface at a time. If you try to access the Web
user interface while someone is logged in, you will be denied access.
•The IDs can be changed through configuration file programming (® see "ADMIN_ID" and
"USER_ID" in 5.3.1 Login Account Settings).
1.1.5.3 Accessing the Web User Interface
The unit can be configured from the Web user interface.
To access the Web user interface
1. Open your Web browser, and then enter "http://" followed by the unit’s IPv4 address into the address field
of your browser. If IPv6 address are used on the unit, enter "http://[IPv6 IP address]".
Note
•To determine the unit’s IP address, perform the following operations on the unit:
1. On the Home screen, select .
2. Select "Information Display", and then press [ENTER].
3. Select "IP Address" or "IPv6 Address".
2. For authentication, enter your ID (user name) and password, and then click OK.
Notice
•The default ID for the User account is "user", and the default password is "userpass".
•The default ID for the Administrator account is "admin", and the default password is "adminpass".
3. The Web user interface window is displayed. Configure the settings for the unit as desired.
Document Version 2014-05 Administrator Guide 29
1.1.5 Web User Interface Programming