INTDIGIT_TIM
Value Format Integer
Description Specifies the length of time, in seconds, within which subsequent digits
of a dial number must be dialed. When this timer expires after the last
key was pressed, dialing will start.
Value Range 1–15
Default Value 5
Web User Interface Reference Inter-digit Timeout (Page 127)
MACRODIGIT_TIM
Value Format Integer
Description Specifies the length of time, in seconds, that the unit waits when a "T"
or "t" has been entered in the dial plan.
Value Range 1–15
Default Value 5
Web User Interface Reference Timer for Dial Plan (Page 127)
INTERNATIONAL_ACCESS_CODE
Value Format String
Description Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Note
•No other characters are allowed.
Default Value Empty string ("+" is deleted)
Web User Interface Reference International Call Prefix (Page 128)
COUNTRY_CALLING_CODE
Value Format String
Description Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Value Range Max. 8 characters (consisting of 0–9)
Default Value Empty string
Web User Interface Reference Country Calling Code (Page 128)
Document Version 2014-05 Administrator Guide 255
5.5.1 Call Control Settings