Description Specifies the RFC 2833 payload type for DTMF tones.
Note
•This setting is available only when "DTMF_MODE" is set to
"Y".
Value Range 96–127
Default Value 101
Web User Interface Reference Telephone-event Payload Type (Page 123)
RFC2543_HOLD_ENABLE
Value Format Boolean
Description Specifies whether to enable the RFC 2543 Call Hold feature on this line.
Value Range •Y (Enable RFC 2543 Call Hold)
•N (Disable RFC 2543 Call Hold)
Note
•If set to "Y", the "c=0.0.0.0" syntax will be set in SDP when
sending a re-INVITE message to hold the call.
•If set to "N", the "c=x.x.x.x" syntax will be set in SDP.
Default Value Y
Web User Interface Reference Supports RFC 2543 (c=0.0.0.0) (Page 123)
MAX_CONNECTION
Value Format Integer
Description Specifies the MAX connections per line.
Value Range 1–24
Default Value 4
Web User Interface Reference Max Connection (Page 120)
VQM_PUBLISH
Value Format Boolean
Description Specifies whether to enable/disable VQM PUBLISH.
Value Range •Y (Enable VQM publish)
•N (Disable VQM publish)
Default Value N
288 Administrator Guide Document Version 2014-05
5.7.1 Per Line - VoIP