4.3.1.1 Connection Settings

Host Name

Description Specifies the host name for the unit to send to the DHCP server.
Note
•This setting is available only when [Connection Mode] is set
to [DHCP].
Value Range Max. 63 characters
Note
•You cannot leave this field empty.
•If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
Default Value {MODEL}

IP Address Mode

Description Specifies whether the unit operates in IPv4 mode, IPv6 mode, or both.
Value Range •Dual stack
•IPv4 only
•IPv6 only
Default Value Dual stack
Configuration File Reference IP_ADDR_MODE (Page 244)

Signal Prefer Mode

Description Specifies the preferred IP mode (IPv4 or IPv6) for sending SIP packets.
Value Range •IPv4
•IPv6
Default Value IPv4
Configuration File Reference IP_MODE_PREF_SIGNAL (Page 245)

Media Prefer Mode

Description Specifies the preferred IP mode (IPv4 or IPv6) for sending voice
packets (RTP).
Value Range •IPv4
•IPv6
Default Value IPv4
Configuration File Reference IP_MODE_PREF_MEDIA (Page 245)
Document Version 2014-05 Administrator Guide 83
4.3.1 Basic Network Settings