Description Selects whether a tone is heard in response to key presses.
Value Range 0–3
–0: high
–1: middle
–2: low
–3: off
Default Value 3
Web User Interface Reference Key Click Tone (Page 151)
ENDCALL_TRANSFER_ENABLE
Value Format Boolean
Description Specifies if users can press the end call soft key to complete the
transfer.
Value Range •Y (Enable End call transfer)
•N (Disable End call transfer)
Default Value N
FOLLOW_SERVER_BELLCORE
Value Format Boolean
Description Specifies whether to follow server bell core requests.
Value Range •Y (Follow server bell core request)
•N (Do not follow server bell core request)
Default Value Y
BUSY_ON_CALL_END
Value Format Boolean
Description Specifies whether the unit should play a busy tone when the remote
party ends the call while the call is connected.
Value Range •Y (Enable busy on call end)
•N (Disable busy on call end)
Default Value Y
REORDER_TONE_TIM
Value Format Integer
Description Specifies the duration of the reorder tone.
Document Version 2014-05 Administrator Guide 257
5.5.1 Call Control Settings