4.6.2.3 Call Features

Block Caller ID

Description Selects whether to make calls without transmitting the phone number
to the called party.
Note
•Availability depends on your phone system.
Value Range •Yes
•No
Default Value No
Configuration File Reference BLOCK_CALLER_ID (Page 293)

Block Anonymous Call

Description Selects whether to reject incoming calls that do not show the caller’s
number.
Value Range •Yes
•No
Default Value No
Configuration File Reference BLOCK_ANONYMOUS_CALL (Page 293)

Do Not Disturb

Description Selects whether to enable the Do Not Disturb feature for incoming calls.
Note
•If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [No] for this setting.
•If you change this setting when [Feature Key
Synchronization] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range •Yes
•No
Default Value No
Configuration File Reference DND_ENABLE (Page 293)

Return Code When DND

Description Specifies the return code sent when the unit is in Do Not Disturb mode.
134 Administrator Guide Document Version 2014-05
4.6.2 Call Control [Line 1]–[Line n]