Panasonic KX-UTG200, KX-UTG300 4.6.2 Call Control [Line 1][Line n]

Default Line
Description Specifies the line used to make an outgoing call when no line is
specified in the dialing operation.
Note
•The available line number may vary depending on the type of
the unit being used.
Value Range 1–4 (for KX-UTG200)
1–6 (for KX-UTG300)
Default Value 1
Configuration File Reference DEFAULT_LINE (Page 259)
4.6.1.2 Call Rejection Phone Numbers
1–30
Description Specifies the phone numbers to reject incoming calls from. A maximum
of 30 phone numbers can be specified.
Note
•You can also configure this setting through the phone user
interface. If these settings are changed through the phone user
interface while being changed through the Web user interface,
the settings made through the phone user interface will be
overwritten by the settings made through the Web user
interface.
Value Range Max. 32 characters
Note
•Even if you specify nonconsecutive fields (e.g., fields 1, 5, and
30), they will be rearranged into consecutive fields after you
save the settings (i.e., 1, 2, and 3).
•If the phone number contains characters other than 0–9, *, #,
and +, the number may not be rejected correctly.
Default Value Not stored.
4.6.2 Call Control [Line 1]–[Line n]
This screen allows you to configure various call features that are specific to each line. The number of lines
available varies depending on the phone being used, as follows:
•KX-UTG200: 1–4
Document Version 2014-05 Administrator Guide 129
4.6.2 Call Control [Line 1]–[Line n]