Settings

[PROJECTOR SETUP] menu

[RS-232C]

Set the communication conditions of the <SERIAL IN>/<SERIAL OUT> terminal.

1) Press ▲▼ to select [RS-232C].

2) Press the <ENTER> button. zzThe [RS-232C]screen is displayed.

3) Press ▲▼ to select an item.

■■To set the communication condition of the <SERIAL IN> terminal

4)

Select [(IN) BAUDRATE] in Step 3).

5)

Press ◀▶ to switch [(IN) BAUDRATE].

 

zzThe setting will change as follows each time

 

you press the button.

 

 

 

 

 

 

 

 

 

[9600]

 

[19200]

 

[38400]

6) Press ▲▼ to select [(IN) PARITY].

7) Press ◀▶ to switch [(IN) PARITY]. zzThe setting will change as follows each time

you press the button.

[NONE] [EVEN] [ODD]

■■To set the communication condition of the <SERIAL OUT> terminal

4)Select [(OUT) BAUDRATE] in Step 3).

5)Press ◀▶ to switch [(OUT)

BAUDRATE].

zzThe setting will change as follows each time you press the button.

[9600] [19200] [38400]

6) Press ▲▼ to select [(OUT) PARITY].

7) Press ◀▶ to switch [(OUT) PARITY]. zzThe setting will change as follows each time

you press the button.

[NONE] [EVEN] [ODD]

■■To set the response

4)Select [RESPONSE(ID ALL)] in Step 3).

5)Press ◀▶ to switch [RESPONSE(ID

ALL)].

zzThe setting will change as follows each time you press the button.

[ON][OFF]

[ON]

Returns the response when the ID

setting is ALL.

 

[OFF]

Does not return the response when the

ID setting is ALL.

 

6) Press ▲▼ to select [GROUP].

7) Press ◀▶ to switch [GROUP]. zzThe setting will change as follows each time

you press the button.

[A] [B] [Z]

Controls multiple projectors simultaneously by sending the ID of

[A] to [Z] RS-232C. Set the group from [A] to [Z]. The projector responds when the ID of RS-232C matches the setting.

8) Press ▲▼ to select [RESPONSE(ID

GROUP)].

9) Press ◀▶ to switch [RESPONSE(ID

GROUP)].

zzThe setting will change as follows each time you press the button.

[ON][OFF]

[ON]

Returns the response when the ID

setting is GROUP.

 

[OFF]

Does not return the response when the

ID setting is GROUP.

 

Note

zzRefer to “<SERIAL IN>/<SERIAL OUT> terminal” ( page 160) for the <SERIAL IN>/<SERIAL OUT> terminals and ID transmission in RS-232C.

108 - ENGLISH