[NETWORK] menu

Parameter

Description

[AROUND LAMP TEMP. SENSOR]

There is a problem with the sensor used to detect exhaust air

temperature. Consult your dealer.

 

[BATTERY]

The battery replacement is required. Consult your dealer.

[LENS MOUNTER]

There is a problem in the lens mounter. Consult your dealer.

 

There is a problem with the luminance sensor. If the problem is not

[BRIGHTNESS SENSOR]

corrected by turning off the power and turning it on again, consult

 

your dealer.

[ANGLE SENSOR]

There is a problem with the sensor that detects angle. Consult your

dealer.

 

[FILTER UNIT]

The air filter unit is not attached. Check the connection of the air filter

unit. ( page 146)

 

 

There are too much dust accumulated in the air filter unit.

[AIR FILTER]

Turn off the <MAIN POWER> switch to <OFF> ( page 51), and

 

clean the air filter ( page 144).

[AC POWER]

AC input voltage is weak. Use electric wiring that can sufficiently

withstand the power consumption of the projector.

 

■■[Network status] page

Click [Status] → [Network status].

The current network setting status is displayed.

Settings

130 - ENGLISH