[DISPLAYOPTIOPTION]menu menu

Settings

Select [DISPLAY OPTION] from the main menu, and select the item from the sub-menu.

Refer to “Navigating through the menu”

( page 61) for the operation of the menu screen.

zzAfter selecting the item, press ◀▶ to set.

[COLOR MATCHING]

You can correct the color difference between the sets when multiple sets are to be used simultaneously.

1)Press ▲▼ to select [COLOR

MATCHING].

2)Press ◀▶ to switch [COLOR

MATCHING].

zzThe setting will change as follows each time you press the button.

[OFF]

 

[3COLORS]

 

[7COLORS]

[MEASURED]

 

[709MODE]

 

 

[OFF]

Color matching adjustment is not

carried out.

 

[3COLORS]

The three colors [RED], [GREEN],

and [BLUE] can be adjusted.

 

The seven colors [RED], [GREEN],

[7COLORS]

[BLUE], [CYAN], [MAGENTA],

[YELLOW], and [WHITE] can be

 

adjusted.

[709MODE] Refer to “To use a colorimeter to

adjust the color matching” ( page 89)

[MEASURED] for details about this mode.

■■To set [3COLORS] or [7COLORS]

3) Select [3COLORS] or [7COLORS] in Step 2).

4) Press the <ENTER> button.

zzThe [3COLORS] or [7COLORS] screen is displayed.

5) Press ▲▼ to select [RED], [GREEN], and [BLUE] (for [7COLORS]: [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], and [WHITE]).

6) Press the <ENTER> button

zzThe [3COLORS:RED], [3COLORS:GREEN] or [3COLORS:BLUE] screen is displayed.

For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA], [7COLORS:YELLOW] or [7COLORS:WHITE] screen is displayed.

zzSet [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.

7) Press ◀▶ to adjust the level. zzAdjustment value will change between 0 and

2 048.

Note

zzOperation when correcting the adjustment color When the adjustment color and the same correction color are moved: The luminance of the adjustment color will change.

When correction color red is changed: Red is added to or subtracted from the adjustment color. When correction color green is changed: Green is added to or subtracted from the adjustment color. When correction color blue is changed: Blue is added to or subtracted from the adjustment color.

zzThis adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is required to make a successful adjustment.

zzPressing the <DEFAULT> button will restore the factory default settings for all items.

zzWhen [COLOR MATCHING] adjustment has been set to any setting other than [OFF], the [COLOR TEMPERATURE] is fixed to [USER1].

zzSet [3D COLOR MATCHING] ( page 84) to set whether 2D and 3D signals are set separately or whether common data is used. (PT-DZ21KE and PT-DS20KE only)

zzWhen 2D and 3D settings are set separately, [NATIVE] or [3D] is displayed in the upper right of the menu. (PT-DZ21KE and PT-DS20KE only)

88 - ENGLISH