Settings

[SIGNALLIST]LIST]menu menu

Select [SIGNAL LIST] from the main menu. Refer to “Navigating through the menu” ( page 61) for the operation of the menu screen.

■■Registered signal status

zzA name can be set for each sub memory ( page 120).

zzMemory number: A1 (1-2)

Sub memory number

When the address number (A1, A2, ... H7, H8) is registered

Registering a signal to the list

After a new signal is input and the <MENU> button on the remote control or the control panel is pressed, the registration is completed and the [MAIN MENU] screen is displayed.

Note

zzUp to 96 signals, including sub memories, can be registered to the projector.

zzThere are 12 pages (eight memories of A through L, with eight memories possible on each page) for memory numbers, and it is registered to the lowest number that is available. If there is no available memory number it will be overwritten from the oldest signal.

zzThe names to be registered are automatically determined by the input signals and memory numbers.

zzIf a menu is being displayed, the new signals will be registered at the instant they are input.

Renaming the registered data

1) Press ▲▼◀▶ to select the signal for which details are to be displayed.

2) Press the <ENTER> button.

zzThe [REGISTERED SIGNAL STATUS] screen is displayed.

zzThe name, memory number, input terminal, frequency, synchronization signal, etc., of the input signal are displayed.

zzPress the <MENU> button to return to the [REGISTERED SIGNAL LIST] screen.

3) Press the <ENTER> button.

zzThe [REGISTERED SIGNAL SETUP] screen is displayed.

4) Press ▲▼ to select [SIGNAL NAME

CHANGE].

5) Press the <ENTER> button. zzThe [SIGNAL NAME CHANGE] screen is

displayed.

6)Press ▲▼◀▶ to select the text, and press the <ENTER> button to enter the text.

7)After the name is changed, press ▲ ▼◀▶ to select [OK], and press the

<ENTER> button.

zzThe registration is completed and it will return to the [REGISTERED SIGNAL SETUP] screen.

zzWhen pressing ▲▼◀▶ to select [CANCEL] and pressing the <ENTER> button, the changed signal name will not be registered and an automatically registered signal name will be used.

Deleting the registered data

1) Press ▲▼◀▶ to select the signal to delete.

2) Press the <DEFAULT> button. zzThe [ENTRY SIGNAL DELETE] screen is

displayed.

zzTo cancel the deletion, press the <MENU> button to return to the [REGISTERED SIGNAL LIST] screen.

3) Press the <ENTER> button. zzThe selected signal will be deleted.

Note

zzA signal can also be deleted from [ENTRY SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.

118 - ENGLISH